Open Access Pub publishes peer-reviewed, free-to-read open-access articles. Showing
articles matching Augmentation — open any to read the full text,
or download the PDF or XML.
Sep 2016 DOI 10.14302/issn.2473-1005.jdoi-16-1196
Singh Nayyar AbhishekCorresponding author
Reader, Department of Oral Medicine and Radiology, Saraswati-Dhanwantari Dental College and Hospital and Post-Graduate Research Institute, Parbhani, Maharashtra, India
Background and Context: Autologous bone grafts require a second surgical exposure to harvest the graft with a significant risk of post-operative complications and donor site morbidity. Employment of allografts potentially eliminates donor site morbidity but carries the potential of causing foreign body immune reactions with a high rate of rejection and failures. Hence, Alloplasts have emerged as novel materials to overcome the drawbacks of autogenous and allogenous bone grafts. Today’s advanced dentistry is enterprising a putty form of calcium phosphosilicate (CPS) into several aspects of reconstructive domain of dentistry including the sinus augmentation procedures, osseous regeneration of periodontal bone defects, cystic cavity defects and alveolar socket preservation. This eccentric multifaceted study was planned as an honest effort on the path of proving the efficiency of CPS as an alloplastic bioactive graft material and aimed at quantitative evaluation of regenerated bone radiographically using Cone Beam Computed Tomography (CBCT) scans following sinus augmentation procedures. Materials and Methods: A total of 20 sinus augmentations were carried-out in 17 patients satisfying the criteria (inclusion and exclusion) requiring placement of implants in atrophic maxilla and in other situations of anatomic constraints. The graft material used was calcium phosphosilicate (CPS) putty (Nova bone dental putty, Novabone products, Alachua, Fla). The residual bone height was recorded using CBCT scans and a computer based software where the measurements were made from the crest of the ridge till the sinus floor lining. The patients were assessed clinically at immediate post-operative, 1 week, 1 month, 3 months and 6 months follow-up recalls post-operatively. Radiographic assessment for bone height was done pre-operatively and at 6 months follow-up recall post-operatively using Cone Beam Computer Tomography scans. Results: The post-treatment bone height (11.76+0.97mm) was found to be significantly higher than the pre-treatment bone height (6.8 +0.70mm) in indirect sinus augmentation procedures (t=14.4, p<0.005). In case of direct sinus augmentation group also, the post-treatment bone height (11.27 +0.71mm) came-out to be significantly higher than the pre-treatment bone height (2.44 +0.81mm) (t=32.17, p<0.005). The post-treatment bone grafted sinus floor measurements (1107.6 + 155.6mm) were also found to be significantly higher than the original sinus floor measurements of bone density (Grayscale values) (412+ 65.5mm) (t=16.6, p<0.001) in case of indirect sinus augmentation procedures. Similarly, the post-treatment bone grafted sinus floor measurements (1169.6+136.7mm) were found to be significantly higher than the original sinus floor measurements of bone density (Grayscale values) (416.4+ 0.70mm) (t=17.9, p<0.001) in case of direct sinus augmentation group. Conclusion: Calcium Phosphosilicate (CPS) was accepted well at the recipient sites without any complications demonstrating its efficiency and reliability in sinus augmentation procedures.
Aug 2016 DOI 10.14302/issn.2473-1005.jdoi-16-1167
Singh Nayyar AbhishekCorresponding author
Reader, Department of Oral Medicine and Radiology, Saraswati-Dhanwantari Dental College and Hospital and Post-Graduate Research Institute, Parbhani, Maharashtra, India
Context: The present study was undertaken to do a comparative evaluation of the role of Cone Beam Computed Tomography (CBCT) imaging and Orthopantomography (OPG) for pre-operative implant planning in combination with sinus grafting procedures in order to assess sinus anatomy and morphology and the existing bone height in three dimensions. Aims: To assess sinus anatomy and morphology and the existing bone height in three dimensions. Materials and Methods: Pre-operative assessment of maxillary sinuses for implant planning using CBCT imaging was performed on 20 sinuses (17 patients). These patients were subjected to orthopantomographs and CBCT imaging both pre-operatively and post-operatively. CBCT imaging helped to decide the type of sinus augmentation procedure best suited for the patients as per the individual needs and depending on the residual alveolar bone height, timing of implant placement, sinus morphology, anticipation of complication and comparative analysis between pre-and post-procedural gain in vertical alveolar bone height and increase in bone density. Statistical Analysis: The results were tabulated and statistically analyzed using Paired and Unpaired t-tests. Results: In the majority of cases, there was a concordance between the treatment type based on pre-operative and post-operative CBCT scans. The assessment of sinus morphology revealed a significantly higher detection rate of abberations in the form of sinus mucosal hypertrophy and septae on CBCT which were imperceptible on routine radiographs. The most appealing result was that vertical alveolar bone height could be measured precisely and there was a significant increase in surgical confidence and a significantly better prediction of complications when using CBCT imaging. Conclusions: A pre-operative planning based on CBCT imaging seems to improve sinus diagnostics and helps to execute a better treatment plan. Also, it is a good tool for the comparison of vertical alveolar bone height pre-and post-operatively following sinus augmentation procedures using various graft materials.
Mar 2025 DOI 10.14302/issn.2638-4469.japb-25-5395
Divakar ChennamsettiCorresponding author
Plant leaf diseases pose significant threats to crop yield and agricultural sustainability, making early and accurate detection crucial for effective disease management. In current years, deep neural network (DNN) techniques have shown remarkable potential in the field of image classification, including plant disease detection. The study aims to investigate the performance of two popular deep learning architectures, namely, VGG16 and InceptionResNetV2, for the detection of tomato plant leaf disease. The proposed methodology involves acquiring a diverse dataset comprising high-resolution images of healthy and diseased leaves from the target crops. Preprocessing techniques such as image augmentation and normalization are applied to enhance the generalization ability of the models and mitigate overfitting. Transfer learning is employed to initialize the deep learning architectures with weights pre-trained on large-scale image datasets to accelerate convergence and improve the models' performance in limited data scenarios. To evaluate performance of proposed networks various metrics such as validation and test accuracies, precision and recall, F1 score, and the area under the curve (AUC) are considered. From the investigations, the classification accuracy of the finest architectures is as follows: 99.8 percent for VGG16 and 99.4 percent for InceptionResNetV2 on Corn Leaves. The results suggest that the models developed during the investigation phase to identify the leaf disease were superior to any existing Deep Neural Networks (DNNs).
Feb 2021 DOI 10.14302/issn.2372-6601.jhor-21-3733
Qing XinCorresponding author
Department of Pathology, Harbor-UCLA Medical Center, 1000 West Carson Street, Torrance, CA 90502, USA.
Breast implant-associated anaplastic large cell lymphoma (ALCL) is a recently recognized type of T-cell lymphoma that can develop following breast implants, with morphologic and immunophenotypic features indistinguishable from those of ALK-negative ALCL. Here we report a case of a 58-year-old woman with a history of subglandular silicone implants placed for bilateral breast augmentation 25 years ago, who presented with bilateral breast pain and was found to have bilateral Baker Grade III capsular contracture, and heterogenous fluid collection centered near the left third costochondral articulation, a suspicious left chest wall lesion, and left axillary lymphadenopathy on imaging. A left axillary lymph node core biopsy and an aspiration of the fluid were performed, and no malignant cells were identified. The patient underwent bilateral removal of breast implants and total capsulectomies. Microscopic examination of the capsule surrounding the left breast implant revealed large pleomorphic tumor cells in a fibrinous exudate. By immunohistochemistry, the tumor cells were found to be positive for CD3 (subset), CD4, CD7, CD30 (strong and uniform), and CD43, and negative for CD2, CD5, CD8, and ALK1, supporting the diagnosis of breast implant-associated ALCL. No lymphoma cells were identified in the right breast capsule, confirmed by CD30 stain. Breast implant-associated ALCL is a very rare disease that can develop many years after breast implant placement. Proper evaluation with breast imaging and pathologic workup is essential to confirm the diagnosis in suspected cases. Our case highlights that adequate sampling is important in the investigation of patients with suspected breast implant-associated ALCL.
Jun 2019 DOI 10.14302/issn.2639-3166.jar-19-2858
Haroun Mohamed Adam AbubakerCorresponding author
Department of Crop Science, College of Agriculture, University of Bahri.
The objective of this study was to evaluate the effectiveness of endophagous Encyrtid parasitic wasp Aenasiusarizonensis (Girault) (Hymenoptera, Chalcidoidea), as a natural enemy for controlling the Mealybug, Phenacoccussolenopsis Tinsley (Hemiptera: Pseudococcidae). Where a Randomized Complete Block Design (RCBD) was adopted. Both, field survey and Laboratory experiments were conducted to study some biological characteristics of the parasitoid A. arizonensis. The results of field study revealed that, the parasitioid was available most of the year, and was highly effective on adults and last larval instar of the mealy bug, P. Solenopsis, with a total percentage of parasitism of 31.26%. While the laboratory results showed that, the duration from oviposition to adult emergence were similar for both male and female. Longevity of male was 23± 2.33 days and female 23.37±1.89 days. Mean daily fecundity in terms of number of Parasitized hosts /female / day ranged from 20 to 24. The sex ratio was 1:1.6 for the male and female in the progeny. Generally, a mass rearing of this parasitoid, with a conservation and augmentation releases could help in the application of an effective management strategy for the control of the cotton mealy bug in the field.
Mar 2019 DOI 10.14302/issn.2473-1005.jdoi-18-583
Walid Al-JalladCorresponding author
Assistant Professor, Department of Prosthodontics, Arab American University, Palestinian Territory
Dental implant restoration is challenging procedure when it involve the esthetics zone, and since implant dentistry is prosthodontically driven procedure, care were practice in restoration of missing teeth in esthetics area which will fulfill the objective. Extraction of teeth leave buccal plate bone unsupported and decrease the blood supply and since this plate is very thin resorption will be expected. Different attempt was done in order to prevent this sequence and create natural emergence profile around dental implant prosthesis. Socket preservation procedures were introduced, however in case of ridge deficiencies, hard and soft tissue augmentation procedures are indicated. Socket shield technique meets the demands of minimal invasion, tissue preservation, and no need of bone substitute materials. And can be applied not only for maintaining buccal contour of an edentulous ridge but also for keeping the inter-implant soft and hard tissue In this review paper we present different articles and case report using socket shield technique as treatment protocols and try to explore different protocol are practice in order to achieve high treatment out come with optimal success.
Feb 2019
P Dargan DallanCorresponding author
Mersey Regional Burns and Plastic Surgery Centre, Whiston Hospital, Warrington Road, Prescot, Merseyside, L35 5DR, United Kingdom
Background: Chest wall deformities may be managed with skeletal manipulation, which risks life-threatening complications. Custom-made prostheses are a less invasive surgical option, manufactured from silicone elastomer using 3D computed tomographic reconstruction and 3D-printed thoracic models. Methods: All patients undergoing custom-made implants between January 2010 and March 2017 were identified from the prosthetic department records. A retrospective review of the clinical records was performed. Mean follow up period was 1.8 years. A comparison was made with our earlier results from 1995 to 2009. Results: Twenty-six patients underwent insertion of custom-made implants for chest wall deformity. Pectus excavatum was present in 50% (n=13), and Poland syndrome 42% (n=11). All 11 female patients underwent 3D reconstruction and 3D printed models, and 3 of 15 males. Four underwent simultaneous bilateral breast augmentation, and three had staged breast augmentation. Seroma occurred in 27% (n=7), and hypertrophic scar in 12% (n=3). The reoperation rate was 23% (n=6), including autologous fat graft in two patients. Surgical suction drains were used in 42% (n=11) patients, of whom 36% (n=4) developed seroma, compared with 17% (n=2) of those without drains (p=0.08). Conclusions: Custom-made prostheses are an effective and safe option for patients with chest wall deformities. The majority have a short postoperative inpatient stay (81%) and are satisfied with the outcome (77%). Seroma was the commonest complication (27%), and drains did not reduce seroma risk. Single dose intravenous antibiotic prophylaxis is adequate. A minority of patients opt for further aesthetic procedures.
Jun 2016 DOI 10.14302/issn.2329-9487.jhc-15-905
D. Raikou VaiaCorresponding author
Dpt of Medicine - Propaedaetic, National & Kapodistrian University of Athens, School of Medicine.
Backgroud: Metabolic acidosis, a common condition particularly in end stage renal disease patients, results in malnutrition and inflammation. In this study, we focused on the importance of metabolic acidosis on manifestations of cardiovascular disease in patients on peritoneal dialysis. Methods: We studied 20 patients on continuous ambulatory peritoneal dialysis (CAPD), 15 males and 5 females, on mean age 61.6 ±11.3 years old. Metabolic acidosis was determined by serum bicarbonate concentrations less than 22mmol/L, which were measured in gas machine. Dialysis adequacy was defined by total Kt/V/week for urea including peritoneal Kt/V for urea and residual GFR (ml/min/1.73m2). High sensitivity C-reactive protein (hsCRP) was measured using enzyme linked immunoabsorbed assay (ΕLISA). The concentrations of intact-parathormone (i-PTH) and beta2-microglobulin (beta2M) were measured by radioimmunoassays. Arterial stiffness was measured as carotid-femoral pulse wave velocity (c-f PWV) and augmentation index (AIx). We built a Cox regression analysis to predict coronary artery disease (CAD), congestive heart failure (CHF) and peripheral vascular disease (PVD). Results: Serum bicarbonate levels were inversely associated to beta2M, i-PTH and AIx (r=-0.451, p=0.04, r=-0.477, p=0.03 and r=-0.569, p=0.009 respectively). Cox- regression analysis revealed significant association of serum bicarbonate levels and PVD having as confounders traditional and specific for these patients risk factors. Conclusion: Metabolic acidosis may be an independent risk factor for arterial stiffening and peripheral vascular disease manifestation in patients on peritoneal dialysis.
May 2015 DOI 10.14302/issn.2470-5020.jnrt-14-558
Enrique Jiménez Caballero PedroCorresponding author
Department of Neurology, San Pedro de Alcántara Hospital, Avenida de Pablo Naranjo nº 2, 10003. Cáceres. Spain.
Background. Endothelial function is characterized by the vasodilator capacity of blood vessel smooth muscle cells mediated by nitric oxide. Some studies have shown an inverse association between the endothelial function and the carotid intima-media thickness (IMT). The relationship between endothelial dysfunction and stroke based on several studies has shown that is altered in all stroke subtypes especially lacunar strokes. Methods. We aimed to investigate endothelial function by EndoPAT device in relation to stroke subtypes. We investigate too the correlations between endothelial function and IMT and we study possible interactions with age, sex, traditional risk factors and severity of stroke. Subsequent patients with acute ischemic stroke were enrolled. They were divided according with the etiological mechanism of stroke (TOAST classification). Endothelial function was assessed with finger plethysmography by the EndoPAT device that gave Reactive Hyperemia Index (RHI) and Augmentation Index (AI). Results. Patients with a cardioembolic stroke had a RHI higher than atherotrombotic or lacunar stroke. There was a negative correlation between RHI and IMT and positive between AI and age. Conclusions. The endothelial function is different between stroke subtypes with higher values of RHI in the cardioembolic respect to lacunar or atherotrombotic. The RHI is correlated with the atherosclerosis by the negative relationship with the IMT. The AI that shows the rigidity in the arteries increased with the age.